Using the same technology as found in military, aerospace and medical applications, an Infrared Building Inspection is an extremely helpful service which benefits the customer in numerous ways. The temperature of a surface can reveal problems which are totally invisible to the naked eye. Temperature variations are speedily located by scanning the surfaces with the help of infrared cameras.
Prior to the discovery of IR cameras there was only one way to find out if a flat roof had a leak: the ceiling gave way. Surveys performed by experts used to be very expensive and this used to be the only preventative cure to stop this damage. Air testing and helium testing were also used to search for leaks and mold, however, these were still expensive and time consuming. IR cameras have been proven to be the most cost-effective method for the roofing industry in detecting Newcastle roof leaks and other associated problems.
IR technology came along in the early twentieth century and the equipment was very expensive, heavy and bulky. Now with the help of digital technology the cost is cheaper, the cameras are smaller and lighter to carry, allowing industries and home owners an easier access in using the best method available.
These cameras are hand held and any problems associated with the building can be identified. IR inspections are requested for many applications such as residential, commercial and industrial, and indeed, for any region due to climate and seasonal change. An inspection using infrared can be of great help to home buyers, home builders, contractors, renovators and surveyors.
By using this method the following faults will clearly be visible: electrical, plumbing, mechanical, windows, structural, Newcastle roofing and even if there are any signs of pests or pest infestation. It is also possible to detect moisture, energy and air loss. Air conditioners could also have air leaks making them inefficient and costly to use.
By pinpointing the above defects, valuable time is saved and therefore repairs are only done on what really needs being fixed. By repeating the IR thermal measurements of the exact targets shows whether the repairs were successful and can be of assistance in anticipating repairs in the future.
The operator of the equipment needs to point, or aim at the area and then depress the button or trigger. After this has been done the energy which has been emitted will convert the information into a reading. The reading will be a temperature value.
If someone wanted to perform their own imaging inspections they would need to obtain a thermal camera with fast scanning speed and good, sharp image quality is essential. It would also need long battery life and on-board storage, so several images could be stored. The use of software is necessary to adjust the images, document findings and to analyze the results. The person would however need training to be successful in using the camera. Experts are required to go through one hundred and twenty hours of training and are expected to spend four years as an active operator. Contact your local New Castle roofing company today to get started!
Article Source: http://EzineArticles.com/5728001
